» ODP (IP22)
Starting capacitors, cast iron frames, rigid base and oversized ball bearings to ensure extended motor life are all standard features. Remember to consider ambient temperatures and that ODP are suitable where dirt and moisture are at minimum. TEFC motors are specially designed for operating in environments of dirt, dust and excess moisture.

» TEFC (IP55)
Starting capacitors, cast iron frames, rigid base and oversized ball bearings to ensure extended motor life, are all standard features. Remember to consider ambient temperatures and that ODP are suitable where dirt and moisture are at minimum. TEFC motors are specially designed for operating in environments of dirt, dust and excess moisture.

» ODP (IP21/IP23) - Ball Bearings
WEG High Efficiency motors are specifically designed to meet or exceed all EPAct requirements for energy efficiency. They are certified by the Department of Energy with our Certificate of Compliance number CC029A.

These Open Drip Proof (ODP) motors are designed for environments where dirt and moisture are minimal and provide maximum ventilation and heat dissipation. Design B torque and high efficiency design from 143T through 444/5T frames.

» ODP (IP21/IP23) - Roller Bearings
WEG High Efficiency motors are specifically designed to meet or exceed all EPAct requirements for energy efficiency. They are certified by the Department of Energy with our Certificate of Compliance number CC029A.

These Open Drip Proof (ODP) motors are designed for environments where dirt and moisture are minimal and provide maximum ventilation and heat dissipation. Design B torque and high efficiency design from 143T through 444/5T frames.

» TEFC (IP55) - Ball Bearings
WEG's W21™ Severe Duty High Efficiency motors are designed to meet or exceed all EPAct requirements for energy efficiency as defined by the DOE. The efficiency values are certified according to the DOE's regulations (Certificate of Compliance number CC029A).

W21™ motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments. They are painted with WEG's own special system, using synthetic enamel alkyd resin paints, which exceed the ASTM B117 standard for salt spray test. The W21™ line is rated for 1.25 Service Factor up to 100HP and meet Design B (up to 100HP) and Design C (from 15HP up to 100HP) torque requirements. This line is rated for dual frequency and dual voltage (with reduced service factor) up to 30 HP. And the entire line is certified Inverter Rated for use with a VFD. This rating meets or exceeds MG1 Part 31 NEMA Specifications.

» TEFC (IP55) - Roller Bearings
WEG's W21™ Severe Duty High Efficiency motors are designed to meet or exceed all EPAct requirements for energy efficiency as defined by the DOE. The efficiency values are certified according to the DOE's regulations (Certificate of Compliance number CC029A).

W21™ motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments. They are painted with WEG's own special system, using synthetic enamel alkyd resin paints, which exceed the ASTM B117 standard for salt spray test. The W21™ line is rated for 1.25 Service Factor up to 100HP and meet Design B (up to 100HP) and Design C (from 15HP up to 100HP) torque requirements. This line is rated for dual frequency and dual voltage (with reduced service factor) up to 30 HP. And the entire line is certified Inverter Rated for use with a VFD. This rating meets or exceeds MG1 Part 31 NEMA Specifications.

» ODP (IP21/IP23) - Ball Bearings
WEG Premium Efficiency motors meet or exceed all NEMA Premium and CEE requirements for energy efficiency.

These Open Drip Proof (ODP) motors are designed for environments where dirt and moisture are minimal. Design B torque and high efficiency design from 143T through 444/5T frames. These motors are specifically designed to provide maximum ventilation and heat dissipation. "C" and "D" flange available.

» ODP (IP21/IP23) - Roller Bearings
WEG Premium Efficiency motors meet or exceed all NEMA Premium and CEE requirements for energy efficiency.

These Open Drip Proof (ODP) motors are designed for environments where dirt and moisture are minimal. Design B torque and high efficiency design from 143T through 444/5T frames. These motors are specifically designed to provide maximum ventilation and heat dissipation. 'C' and 'D' flange available.

» TEFC (IP55) - Ball Bearings
WEG's W21™ NEMA Premium motors meet or exceed all NEMA Premium and CEE requirements for energy efficiency.

These TEFC motors are built according to NEMA specifications and designed for operation in moist or dusty atmospheric conditions without affecting their useful life. Premium Efficiency WEG motors are tested according to IEEE 112 std., method 'B' and their efficiency values are certified by UL Labs (CSA C390) and NEMA MG1.12.53, both A and B Standards. These motors are NEMA Design 'B' and maintain exceedingly high breakdown and locked torque, while providing the highest rated efficiency levels.

» TEFC (IP55) - Roller Bearings
WEG's W21™ NEMA Premium motors meet or exceed all NEMA Premium and CEE requirements for energy efficiency.

These TEFC motors are built according to NEMA specifications and designed for operation in moist or dusty atmospheric conditions without affecting their useful life. Premium Efficiency WEG motors are tested according to IEEE 112 std., method 'B' and their efficiency values are certified by UL Labs (CSA C390) and NEMA MG1.12.53, both A and B Standards. These motors are NEMA Design 'B' and maintain exceedingly high breakdown and locked torque, while providing the highest rated efficiency levels.

» Crusher Duty® IEC Metric Frame
WEG Crusher Duty® motors are specifically designed to meet the demanding requirements of the rock crushing industry. FC200 grade cast iron provides superior strength and heat dissipation. And 4140 high-strengthen steel shafts keep the motor running when others fail. These motors are designed for vertical or horizontal mounting and have exceptional high starting and breakdown torque. Plus, these models are Tru-Metric™ dimensions and rated for 50Hz. Compare the standard features of the WEG Crusher Duty® motor to any other and see why these motors are "Crusher Duty®" tough!

» TEFC (IP55)
WEG Crusher Duty® motors are specifically designed to meet the demanding requirements of the rock crushing industry. FC200 grade cast iron, provides superior strength and heat dissipation. And 4140 high-strength steel shafts keep the motor running when others fail. These motors are designed for vertical or horizontal mounting and have exceptional high starting and breakdown torque. Compare the standard features of the WEG Crusher Duty® motor to any other and see why these motors are "Crusher Duty®" tough!

» Vertical Shaft Impactor (VSI) - TEFC (IP55)
WEG Crusher Duty® motors are specifically designed to meet the demanding requirements of the rock crushing industry. FC200 grade cast iron, provides superior strength and heat dissipation. And 4140 high-strength steel shafts keep the motor running when others fail. These motors are designed for vertical or horizontal mounting and have exceptionally high starting and breakdown torque. Compare the standard features of the WEG Crusher Duty® motor to any other and see why these motors are "Crusher Duty®" tough!

» TEFC (IP55) - Aluminum Frame
This line is designed and built according to European IEC 34 and IEC 79 Standards. The enclosure TEFC (IP55) is ideal for indoor and outdoor applications. These motors are tested according to IEEE 112 std., method ‘B’ and their efficiency values are certified according to EPACT regulations (CC029A).

» TEFC (IP55) - Cast Iron Frame
This line is designed and built according to European IEC 34 and IEC 79 Standards. The enclosure TEFC (IP55) is ideal for indoor and outdoor applications. These motors are tested according to IEEE 112 std., method ‘B’ and their efficiency values are certified according to EPACT regulations (CC029A).

» Auger Drive - TEFC (IP55) - Single-Phase
WEG Auger Drive motors are specifically designed for Feed-Drive units requiring a reliable and efficient motor. Provided with mechanical protection of centrifugal switch to prevent damage to the motor in case of overspeed, manual thermal overload protection and two bolts mounting NEMA "N" flange.

» Three-Phase - High Efficiency
WEG Brake motors consist of an induction motor coupled to a disc brake, forming an integrated compact and robust unit. The unit is TEFC, and has the same performance characteristics of WEG TEFC range of motors. The brake is of sturdy construction with few moving parts, ensuring long durability with a minimum of maintenance.

» Three-Phase - Standard Efficiency
WEG Brake motors consist of an induction motor coupled to a disc brake, forming an integrated compact and robust unit. The unit is TEFC, and has the same performance characteristics of WEG TEFC range of motors. The brake is of sturdy construction with few moving parts, ensuring long durability with a minimum of maintenance.

» Single-Phase
These high quality motors are designed to meet the high torque requirements of air compressor loads. Ball bearings designs and manual reset thermal protection are standard features on all ratings. These heavy duty motors are rolled steel constructions NEMA 56 frames. Special electrical and mechanical features ensure reliable service and long motor life.

» Three-Phase
These high quality motors are designed to meet the high torque requirements of air compressor loads. These heavy duty motors are rolled steel constructions NEMA 56 frames. Special electrical and mechanical features ensure reliable service and long motor life.

» Explosion Proof - Single-Phase - NEMA 56
TWEG Explosion Proof NEMA 56 Motors are designed for operation in hazardous locations containing flammable liquids, explosive gases and dust.

CSA area classification for frame 56 XP as follows:
• Class I, Group D, Class II, Groups F and G, Code T3C
• Class I, Group D, Code T3C

» Explosion Proof - Three-Phase - NEMA 56
WEG Explosion Proof NEMA 56 Motors are designed for operation in hazardous locations containing flammable liquids, explosive gases and dust.

CSA area classification for frame 56 XP as follows:
• Class I, Group D, Class II, Groups F and G, Code T3C
• Class I, Group D, Code T3C

» Farm Duty Motors - TEFC (IP55) - Single-Phase
The "FARM DUTY" motors are specially designed for farm duty applications requiring high starting torque and moderate starting current.

Some standard features, such as V-ring slinger in both drive and opposite drive ends, reversible shaft rotation and start capacitors, provide versatility for indoor and outdoor use. The manual overload protection available in all frames protects against extreme overloads, offering maximum operator safety.

» High Efficiency
WEG's W21 Severe Duty High Efficiency motors are designed to meet or exceed all EPAct requirements for energy efficiency as defined by the DOE. Efficiency values are certified according to the DOE’s regulations (Certificate of Compliance number CC029A).

W21 motors meet the most demanding Food application requirements. These TEFC motors are all cast iron construction, with enclosures rated as IPW55 to handle wet and dirty environments. They are painted with WEG’s own special system using white, corrosion resistant 2 part epoxy paint. The W21 Food Processing line is rated for 1.25 Service Factor. This line is rated for dual frequency and dual voltage (with reduced service factor). And the entire line is certified Inverter Rated for use with a VFD. This rating meets or exceeds MG1 Part 31 NEMA Specifications.

» Single-Phase - NEMA 61
These motors were built for use on fuel pumps and all of the components were manufactured according to the strictest national and international standards, thus offering to the end user and effective safety against explosion risks.
CSA area classification for frame 61 as follows:
• Class I, Group D, Class II, Groups F and G, Code T3C
• Class I, Group D, Code T3C

» Three-Phase - NEMA 61
These motors were built for use on fuel pumps and all the components were manufactured according to the strictest national and international standards, thus offering to the end user and effective safety against explosion risks.
CSA area classification for frame 61 as follows:
• Class I, Group D, Class II, Groups F and G, Code T3C
• Class I, Group D, Code T3C

» NEMA Premium
WEG's W21™ NEMA Premium motors meet or exceed all NEMA Premium and CEE requirements for energy efficiency.

These WEG IEEE 841 High Efficiency Mill and Chemical Duty Motors are specially suited for Pulp and Paper Mills, Petrochemical, Steel Mills and applications requiring Severe Duty long life motors.

» High Efficiency
The WEG line of Inverter Duty motors are specifically designed to provide maximum performance and speed range for inverter fed applications. They are fitted with constant speed blowers to keep the motor cool even under hi-torque, low speed conditions.

Meet or exceed all EPAct requirements for energy efficiency.

» Single-Phase - "JM" Type - TEFC (IP55) - Standard Efficiency
WEG single-phase totally enclosed motors are specially designed for operating in environments of dirt, dust and excess moisture. Starting capacitors, all cast iron frames, rigid bases, reversible shaft rotation and oversized ball bearings are all standard features.
NEMA-T, NEMA 48 & 56 and IEC Metric Frame are also available.

» Single-Phase - "JP" Type - TEFC (IP55) - Standard Efficiency
WEG single-phase totally enclosed motors are specially designed for operating in environments of dirt, dust and excess moisture. Starting capacitors, all cast iron frames, rigid bases, reversible shaft rotation and oversized ball bearings are all standard features.
NEMA-T, NEMA 48 & 56 and IEC Metric Frame are also available.

» Three-Phase - "JM" Type - ODP - High Efficiency
WEG offers JM standardized type of ODP close-coupled pump line of motors. Remember that ODP are suitable where dirt and moisture are at a minimum.

» Three-Phase - "JM" Type - ODP - High Efficiency - Vertical Motors
WEG offers JM standardized type of ODP close-coupled pump line of motors. Remember that ODP are suitable where dirt and moisture are at a minimum.

» Three-Phase - "JM" Type - ODP - Standard Efficiency
WEG offers JM standardized type of ODP close-coupled pump line of motors. Remember that ODP are suitable where dirt and moisture are at a minimum.

» Three-Phase - "JM" Type - ODP - Standard Efficiency - Vertical
WEG offers JM standardized type of ODP close-coupled pump line of motors. Remember that ODP are suitable where dirt and moisture are at a minimum.

» Three-Phase - "JM" Type - TEFC (IP55) - High Efficiency
WEG offers both JM and JP standardized types of close-coupled pump line of motors. Total enclosures permit these motors to operate in moist or dusty atmospheres.

» Three-Phase - "JM" Type - TEFC (IP55) - Standard Efficiency
WEG offers both JM and JP standardized types of close-coupled pump line of motors. Total enclosures permit these motors to operate in moist or dusty atmospheres.

» Three-Phase - "JP" Type - ODP - High Efficiency
WEG offers JP standardized type of ODP close-coupled pump line of motors. Remember that ODP are suitable where dirt and moisture are at a minimum.

» Three-Phase - "JP" Type - ODP - High Efficiency - Vertical
WEG offers JP standardized type of ODP close-coupled pump line of motors. Remember that ODP are suitable where dirt and moisture are at a minimum.

» Three-Phase - "JP" Type - ODP - Standard Efficiency
WEG offers JP standardized type of ODP close-coupled pump line of motors. Remember that ODP are suitable where dirt and moisture are at a minimum.

» Three-Phase - "JP" Type - ODP - Standard Efficiency - Vertical
WEG offers JP standardized type of ODP close-coupled pump line of motors. Remember that ODP are suitable where dirt and moisture are at a minimum.

» Three-Phase - "JP" Type - TEFC (IP55) - High Efficiency
WEG offers both JM and JP standardized types of close-coupled pump line of motors. Total enclosures permit these motors to operate in moist or dusty atmospheres.

» Three-Phase - "JP" Type - TEFC (IP55) - Standard Efficiency
WEG offers both JM and JP standardized types of close-coupled pump line of motors. Total enclosures permit these motors to operate in moist or dusty atmospheres.